0845 658 9102
Nationwide Fire & Security

Fire damper testing and maintenance

In the event of a fire, no matter how well a building is designed to contain a fire in the zone it originated, if your ventilation system has faulty fire dampers, a fire could spread rapidly to other parts of the building.

Fire and smoke dampers save lives. So much so that BS9999 Code of Practice for Fire Safety in the Design, Management & Use of Buildings requires all ducting, whether it is for air conditioning, heating or ventilation, be fitted with fire dampers. In addition to being tested upon installation, these dampers require regular testing and maintenance as part of a wider fire safety maintenance plan.

Traditional fire dampers (curtain damper) employ a fusible link which upon contact with heat of a set temperature, is deigned to melt, causing the damper to close and block access to flames and smoke. However, studies have shown that this system alone is not fool proof and that in certain situations, such as when the ventilation system has been shut down; as the fire intensifies, so does positive pressure, which pushes towards adjacent fire zones, spreading smoke in its wake. Meanwhile, combustion gases in the ducting cool down so much that the temperature at which the fusible link usually melts, may be reached either very late or sometimes not at all.

With this in mind, when a ventilation system is shut down, best practice would be to close all the fire dampers too. This requires motorised fire dampers. Such devices can be linked to a fire alarm system which employs smoke detectors in the ducting to detect smoke and close the dampers long before a curtain damper would reach its maximum temperature.

Maintenance obligations

According to the Regulatory Reform (Fire Safety) Order 2005, it is the employer’s responsibility to maintain their fire safety systems. If you run a business or own a building it is your responsibility to book regular fire damper tests and ensures that a proper maintenance plan is followed. Most fire ducts must be inspected at least every 12 months and not exceeding 2 years and that any faulty fire dampers are repaired or replaced immediately upon discovery.

Nationwide Fire & Security engineers are equipped to inspect fire dampers, fire spinklers, smoke vents and other fire safety systems throughout the UK.

Call today for more information on: 0845 658 9102

Intruder Alarm Systems

Intruder Alarm Systems

We source our Intruder alarm panels and sensors direct from the manufacturer, ensuring our quotes for commercial intruder alarm system installation are extremely competitive. Our engineers are experts in most security systems, with regular manufacturer based training sessions, in both the installation and maintenance of commercial intruder alarms & CCTV systems. 

Learn more

Emergency lighting

Emergency lighting testing and maintenance

We install, test and maintain all manner of emergency lighting systems  for compliance to BS 5266/BS EN 50172

Learn more

Getting good value on your maintenance contract?

Disabled refuge WC maintenance
  • Engineer response 24/7 365 days
  • Dedicated manned out of hours telephone line
  • Large stock of spare parts for most systems.
  • Latest technology employed using remote diagnostics to allow fast fault finding.
  • State of the art software and database to monitor routine servicing and false alarms.

Learn more
Our Accreditations
  • BT Redcare
  • Kitemark
  • Fire Industry Association
  • BAFE Fire Safety Register
  • Paxton Access Registered Installer
  • Constructionline
  • CHAS Accredited Contractor
  • Gent 24 Approved Intaller